AVTECH News March 2018

March 8, 2018 Jack Hughes 0 Comments

All of the recent AVTECH Software news condensed into a single handy post for March.

Digital Active Power w/Temperature Sensor Buy One, Get One FREE!

AVTECH's patent-pending, award-winning Digital Active Power with built-in temperature sensor is the only sensor on the market today that offers users the ability to quickly begin monitoring power status to nearly any device that draws at least 100 watts of power, as well as providing real-time temperature monitoring... all for just £79.60 ex. VAT!

The Active Power Sensor “Buy One, Get One FREE” promotion will allow you to stock up on the Digital Active Power to monitor the power status to all of your critical equipment, including:

• Servers
• Network switches
• Phone systems
• HVAC equipment
• Pumps
• Security systems
• Firewalls
• Freezers
• And more...

There are NO purchase limits with this promotion! No matter how many Active Power Sensors you purchase, you will receive one free of charge* for every sensor that you buy. If you buy 5 Active Power Sensors, you will receive 5 more for free. If you buy 50 Active Power Sensors, you will receive 50 more for free!

For more information, and to take part in the Digital Active Power w/Temperature Sensor “Buy One, Get One FREE” promotion, just click this link.

Room Alert Firmware Updates

AVTECH Software have released a number of firmware updates for the Room Alert 3E, Room Alert 4E / 4ER, Room Alert 12E / 12ER and Room Alert 32E / 32W.

Room Alert 3E Changes

• Resolved an issue that could prevent the web interface from loading when viewed from a computer without an internet connection.
• GoToMyDevices.com has moved to Account.RoomAlert.com. The firmware has been updated to support and reference this change.
• Resolved an issue that could prevent the sysObjectID value from loading correctly in SNMP queries.
• Resolved an issue that could allow invalid SMTP ports to be saved through the Settings page.
• Added support for dew point on Digital Temperature & Humidity Sensors.
• Updated saving of passwords to make it more clear when the maximum length is exceeded.
• Resolved an issue that could prevent users from saving certain valid email usernames.
• Resolved an issue that could cause an alarm icon to display on Digital Temperature & Humidity Sensors configured for heat index with no threshold set.

Room Alert 4E / 4ER Changes

• Resolved an issue that could prevent the web interface from loading when viewed from a computer without an internet connection.
• GoToMyDevices.com has moved to Account.RoomAlert.com. The firmware has been updated to support and reference this change.
• Resolved an issue that could prevent the sysObjectID value from loading correctly in SNMP queries.
• Resolved an issue that could allow invalid SMTP ports to be saved through the Settings page.
• Added support for dew point on Digital Temperature & Humidity Sensors. Click here for more information.
• Updated saving of passwords to make it more clear when the maximum length is exceeded.
• Resolved an issue that could prevent users from saving certain valid email usernames.
• Resolved an issue that could cause an alarm icon to display on Digital Temperature & Humidity Sensors configured for heat index with no threshold set.
• Resolved an issue that could prevent relays from triggering.

Room Alert 12E / 12ER Changes

• Resolved an issue that could prevent the web interface from loading when viewed from a computer without an internet connection.
• GoToMyDevices.com has moved to Account.RoomAlert.com. The firmware has been updated to support and reference this change.
• Resolved an issue that could prevent the sysObjectID value from loading correctly in SNMP queries.
• Resolved an issue that could allow invalid SMTP ports to be saved through the Settings page.
• Added support for dew point on Digital Temperature & Humidity Sensors. Click here for more information.
• Updated saving of passwords to make it more clear when the maximum length is exceeded.
• Resolved an issue that could prevent users from saving certain valid email usernames.
• Resolved an issue that could cause an alarm icon to display on Digital Temperature & Humidity Sensors configured for heat index with no threshold set.

Room Alert 32E / 32W Changes

• Resolved an issue that could prevent the web interface from loading when viewed from a computer without an internet connection.
• GoToMyDevices.com has moved to Account.RoomAlert.com. The firmware has been updated to support and reference this change.
• Resolved an issue that could allow invalid SMTP ports to be saved through the Settings page.
• Added support for dew point on Digital Temperature & Humidity Sensors. Click here for more information.
• Updated saving of passwords to make it more clear when the maximum length is exceeded.
• Resolved an issue that could prevent users from saving certain valid email usernames.
• Resolved an issue that could cause an alarm icon to display on Digital Temperature & Humidity Sensors configured for heat index with no threshold set.
• Resolved an issue that could cause alarm clear actions not to execute properly.