AVTECH Mini UPS and Power Sensor
The AVTECH Mini UPS & Power Sensor is a unique sensor/UPS (Uninterruptible Power Supply) combination that detects loss of main power while providing seamless battery backup power.
AVTECH's Mini UPS & Power Sensor is a unique sensor/UPS (Uninterruptible Power Supply) combination that detects loss of main power while providing seamless battery backup power for approximately fifteen minutes or more beyond loss of power. Total run time depends upon the power draw of the connected Room Alert or other 5V device.
Red and Green status LEDs allow you to instantly know the power status at a glance. Compact and lightweight, the MUPS is perfect for small, weight sensitive or remote locations where standard UPS models are difficult or impossible to accommodate.
The MUPS includes a built-in power sensor and can be monitored by any Room Alert to indicate a loss of mains power by simply connecting the relay output on the MUPS back to a Room Alert. When a loss of power occurs, the MUPS is immediately and seamlessly enabled to supply continuous power long enough for the connected Room Alert unit to send out alert notifications. Room Alert can send status and alert notifications via email, email-to-SMS, SMS (with plug-in) and SNMP Traps.
Technical Specification of the Mini UPS and Power Sensor
|Environmental Condition Monitored||Power, Uninterruptible Power Supply (UPS) battery back-up|
|Real-time recognition||Mains Power On/Off|
|Power Supply||5VDC 1A Adaptor|
|Sensor Cable Length||7.5m|
|Sensor Cable Type||2 Wire Sensor Cable|
|Maximum Sensor Cable Length||Approximately 30m|
|Compatible Products||All Room Alerts|
Mini UPS and Power Sensor Variants
The Mini UPS & Power Sensor is only available in a single variant.