AVTECH Spot Flood Sensor
The AVTECH Spot Flood Sensor is an flood sensor capable of detecting water leaks or flood at a single location.
The AVTECH Spot Flood Sensor is an auto-sense flood sensor capable of detecting water leaks or flood at a single location. Use in conjunction with a drip tray to detect water leaks from your air conditioning unit.
What is a Spot Flood Sensor?
A spot flood sensor detects water leaks in one location only. It is designed for alerting you to leaks from critical equipment like your air conditioning unit. Ideally the spot sensor should be used with a drip tray. A drip tray concentrates water dripped into it over the area of the tray and pools the water into a single location typically in the centre. The spot sensor should be placed where the water is concentrated.
If you need to monitor a large surface area, for instance underneath your server room raised floor, the rope flood sensor would be a good choice.
Technical Specification of the Spot Flood Sensor
|Environment Condition Monitored||Flood / Water|
|Sensor Range||Alerts when wet|
|Power Supply||None. Monitoring unit supplies power.|
|Sensor Cable Type||2 wire speaker cable|
|Available Sensor Cable Lengths||7.5m|
|Compatible Monitoring Products||Compatible with all Room Alerts|
Spot Flood Sensor Variants
The Spot Flood Sensor is available with a cable length of 7.5m only. The length of the cable is the distance you can place the water sensitive unit away from your Room Alert.
|Spot Flood Sensor||7.5m||RMA-FS2-SEN|
Flood Sensor Comparison
A comparison of all of the various flood sensors available for your AVTECH Room Alert.
|Product||Type||Cable Length||Water Sensitive Cable Length||Room Alert Support|
|Spot Flood Sensor||Spot - detects water ingress in one location||7.5m||N/A||All Room Alert monitors & Wireless Hubs (WiSH)|
|Rope Flood Sensor||Rope - detects water ingress over a wide area||7.5m||2.4m & 7.3m||All Room Alert monitors & Wireless Hubs (WiSH)|