AKCP sensorProbe2 Environment Monitor with PoE

Available in 2-5 days.
SKU
SP2POE
£316.20 £263.50

Great value, 2 sensor ports, easy to set up, economical monitoring solution with Power over Ethernet (PoE) support.

A simple, accurate and rugged 2 port intelligent sensor monitoring device

The sensorProbe2 is a low cost SNMP enable and Web-based Environmental Monitoring Device. Based on years of industry experience, it is ready to run out of the box. Simply assign the IP address and connect to the embedded webserver.

sensorProbe2 has been field-proven with versatile measurement options. It can be configured to prevent specific kinds of exposure to humidity, water leakage, gas, airflow and low/high temperature, etc. It supports other sensors which can monitor voltage drop, security, analogue and dry contacts.

A wide range of AKCP intelligent sensors are supported. Simply plug the sensor in the sensorProbe2 (or into your structured cabling network) and the autosense feature will recognise the type and automatically configure it. The sensorProbe monitors your equipment’s environmental variations, and notifies you through Email or SNMP Alerts in your Network Management system in advance to prevent any disaster. The user-friendly web interface allows you to monitor and control the sensorProbe2 from anywhere remotely. It also provides you with a graphical representation of environmental conditions.

AKCP sensorProbe2 Rear

The sensorProbe2 has been tightly integrated with Network Management Systems like HP Openview, CA TNG Unicenter, IBM Tivoli and WhatsUp Gold and is designed to run for years non-stop.

Features of the sensorProbe2 with PoE

  • Compatible with a wide range of AKCP’s intelligent sensors
  • Battery backed time of day clock for accurate record keeping
  • Combine with dual temperature and humidity sensor for up to 4 sensor points on 2 ports
  • Runs Power over Ethernet (fully IEEE 802.3af compliant
  • 2 autosense intelligent sensor ports
  • Full SNMP compliance
  • Microcode firmware update over the internet
  • Embedded web interface for remote access and configuration
  • Built in software for data logging, alerting and graphing

For the sensorProbe2 without PoE (Power over Ethernet) please view sensorProbe2.

Supported Sensors

The AKCP sensorProbe2 is the monitoring base unit, it does not have any built-in sensors. In order to measure anything you need to attach one or more sensors to the base unit.

Sensor Connectors 2 x RJ-45 sensor connectors
Built-in Sensors None
Max. External Sensors 2
Supplied External Sensors None
Supported External Sensors AKCP Temperature Sensor
AKCP Combined Temperature/Humidity Sensor
AKCP Airflow Sensor
AKCP Digital Voltmeter
AKCP Dry Contact Sensor
AKCP Smoke Detector Sensor
AKCP Motion Detector Sensor
AKCP Power Detector Sensor
AKCP Security Sensor
AKCP Spot Water Detection Sensor
AKCP Rope Water Sensor
AKCP ropeFuel Sensor

sensorProbe Range Feature Summary

 AKCP sensorProbe2AKCP sensorProbe2 PoEAKCP sensorProbe2+AKCP sensorProbe4AKCP sensorProbe4 PoEAKCP sensorProbe8AKCP sensorProbe8 PoEAKCP sensorProbe8 X20AKCP sensorProbe8 X60
Mounting Wall Wall Wall Rack Rack Rack Rack Rack Rack
Sensor Ports 2 2 4 4 4 8 8 8 8
Extended Dry Contact Inputs None None None None None None None 20 60
Built-in Sensors None None None None None None None None None
Supplied External Sensors None None None None None None None None None
Optional Built-in Cellular Modem
Power over Ethernet (PoE)

AKCP sensorProbe2 Rack Monitoring Options

AKCess Pro Server

Installations with more than one sensorProbe2 or other AKCP monitoring units greatly benefit from using AKCess Pro Server software. AKCess Pro Server is a free software application created by AKCP. The application enables you to group your entire estate of AKCP monitors into a single screen, giving you centralised data logging and alert configuration.

  • Web based interface so you can manage from anywhere;
  • Extensive map support with drill down to cabinet level;
  • Extensive notification options taking into account sensor, power or access control status;
  • Easy notification configuration with the Notification Wizard. Extensive alert actions like SNMP traps, Email, Popup Messages, SMS, Remote Unlock;
  • Extend with your own scripts for complex sensor input or alert notifications.

What's in the Box?

  • 1 x sensorProbe2 base unit with PoE
  • 1 x power adapter with power cord
  • 1 x 5ft. ethernet cross over cable
  • Help CD
  • Printed manual
More Information
Connectivity Ethernet (RJ45)
Built-in Sensors

None

Max External Sensors

2 x Sensors / Dry Contacts

External Sensors Supported
AKCP Temperature Sensor
AKCP Combined Temperature/Humidity Sensor
AKCP Airflow Sensor
AKCP Digital Voltmeter
AKCP Dry Contact Sensor
AKCP Smoke Detector Sensor
AKCP Motion Detector Sensor
AKCP Power Detector Sensor
AKCP Security Sensor
AKCP Water Detection Sensor
AKCP Rope Water Sensor
AKCP ropeFuel Sensor
External Sensors Supplied

None

Mounting Options Wall
Logging Yes
User Interface Built in web interface
Alerting Email, Siren / Strobe Light, SNMP Trap
Supported Protocols

SNMP v1

Dimensions Size : 11.4cm x 6.3cm x 3.1cm
Inputs

2 x RJ-45 Sensor Ports / Dry Contacts

Up to 10 dry contact inputs 

Output

Configurable output signals (0VDC/5VDC) on any of the 2 RJ-45 sensor ports

Operating Environment

Temperature : Min. -35°C - Max.80°C

Humidity : Min. 20% - Max. 80% (Non-Condensing)

Network Interface

Standard 100MB Full Duplex

Ethernet RJ-45 Port

Status Indicators

LED indication for Power

LED for Network Connectivity

LED for sensor online and threshold status

Power over Ethernet IEEE 802.3af
Components

Manufactured using highly integrated, low power surface mount technology to ensure long term reliability.

Power Consumption

1.125 Watt, 0.15A

Temperature Units Celsius / Fahrenheit
Ask a Question
Page
I assume that you would like to be able to have the siren/strobe light acitvated by your existing alarm system. If you have a dry contact coming from your alarm system into a port on the sensorProbe, and the siren/strobe from another port on the sensorprobe, then yes, you can trigger activation of the siren/strobe light based on a change in state across the dry contact.
Published in: AKCP
When you send email using regular SMTP servers the email you send is sent plain text over the network. Plain text means that, with proper network sniffiing tools, the email can be read by anybody with access to the network traffic. The internet was a much more naive place when the original SMTP standard was developed. It has since been enhanced to include an option to encrypt the email traffic when it is sent from the email client to the server. Why does encrypted email matter to an... Read more
Published in: Environment Monitoring
The AKCP Temperature Sensor has a temperature range of -55 to +125°C / -67 to +257°F with an accuracy of ±0.5°C from -10 to +75°C.
Published in: AKCP
Page
  1. Announcing the AKCP Programmable LCD Display Announcing the AKCP Programmable LCD Display The AKCP LCD Display features a high quality, backlit, display and includes a free built in temperature sensor. The display connects to any sensorProbe+ device, via the intelligent sensor port, and can be programmed to show the reading and status of any AKCP sensor connected to the sensorProbe+.
  2. New EU VAT Free Shopping New EU VAT Free Shopping Business customers with a valid VAT number can now shop VAT free when the goods are sent outside of the United Kingdom.
  3. AKCP News August 2017 AKCP News August 2017 AKCP have made some improvements to the temperature sensor product line (TMP00, DCT00, TMS), with a new style box. All temperature sensors will ship with this new enclosure starting 15th September 2017. Dual sensors with temperature and humidity will follow in this new style enclosure by second quarter 2018.

How to Buy

Ordering from outside the UK?

OPENXTRA is able to supply this product worldwide. Order online using either UK Pounds or Euros, email us, request a quote or call +44 (0)1943 465918 for a quotation in UK Pounds, Euros. If you are in the EU but outside the UK, we may be able to quote ex. VAT.

We can also supply UK, European or US style power supplies for most products.