AKCP probeSwitch

Available in 2-5 days.

SKU

PS00

£156.00 £130.00

Turn off all notifications with a simple turn of a key switch.

Carry out maintenance on areas that would normally trigger unnecessary multiple notifications. With this new product it is now possible to turn off all notifications with a simple turn of a key switch.

This product can be connected to the securityProbe Series as a dry contact and once set up is ready to work. Once connected there is no need to disable the notifications using the web interface, your maintenance engineer simply turns the switch connected to the unit, to turn off the notifications and when they have completed their work just switch the notifications back on.

Specifications

Settings :	Enabled or Disabled
Communications Cable :	RJ45 jack to sensor using UTP Cat-5 wire
Maximum Extension Cable :	305m (1000 ft.) with approved low capacitance shielded cable or UTP.
Sensor Type :	Key Lock Switch

Product Attachments

AKCP probeSwitch Datasheet (520.33 KB)

FAQ

Ask a Question

Is it possible to extend AKCP sensors?

AKCP sensors all use RJ45 connectors and can be extended using standard CAT5 cable and one or more inline couplers up to a maximum distance of 100m. Historically, AKCP did recommend extending their sensors using your structured cabling systems. AKCP have more recently stopped recommending the use of structured cabling systems as structured cabling systems become more intelligent they begin to interfere with the sensor signal making the sensor reading unreliable at best. Read more

on 21 Jul 2016 Published in: AKCP