We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
AKCP IO-digital8 Sensor
The AKCP IO-digital8 is an intelligent sensor with a single RJ45 connector at one end and can support up to 8 dry contacts. It is designed for use with the AKCP securityProbe 5E to extend its sensor capacity.
The AKCP IO-digital8 is an intelligent sensor with a single RJ45 connector at one end and can support up to 8 dry contacts. It is designed for use with the AKCP securityProbe 5E to extend its sensor capacity.
There are two versions of the IO-digital8 depending on your requirements.
The first version (IODC8) has a single RJ45 connector at one end and 8 x 2 pin dry contact connectors along one side.
The second version (IODCRJ8) also has a single RJ45 connector at one end but the 8 x 2 pin dry contact connectors are replaced by two RJ45 connectors, each compatible with 4 dry contacts.
The dry contacts can be configured as inputs or outputs and the IO-digital8 is user definable so can be used to detect many different inputs such as UPS status, security systems, alarm panels or air conditioning status.
- Used to extend sensor capacity of the securityProbe 5E
- auto-detects the presence of each dry contact on the IO-digital8
- Connect up to 8 IO-digital8 sensors per securityProbe 5E main unit and E-sensor expansion modules for a total of 64 dry contacts per box
- Full autosense including disconnect alarm
Specifications
- Measurement range: Alarm or Normal
- Communications cable: RJ45 with UTP Cat 5 cable.
- Sensor type: Open/closed or cycles contact switches
- Input voltage range: 0 to 5 Volts on each of the 8 dry contacts
- Current range: Can sink up to 20 mAmps on each of the 8 dry contacts
- Measurement rate: Multiple readings every second
- Power source: Powered by the securityProbe base unit. No additional power needed
- Normal input voltage is settable under software on each of the 8 dry contacts
- Normally open, normally closed is settable under software on each of the 8 dry contacts
- Only compatible on AKCess Pro securityProbe line of units
- securityProbe 5E autodetects the presence of each dry contact on the IO-digital8
- Connect up to 8 IO-digital8 sensors per each securityProbe 5E main unit and E-sensor8 expansion modules for a total of 64 dry contacts per box
- Full autosense including disconnect alarm
- Compatible base units: all securityProbe monitors