AKCP 5 Dry Contact Inputs
Add 5 dry contacts per RJ45 port on the AKCP sensorProbe2+ (SP2+).
The dry contact ports can be used to monitor any dry contact inputs though a single RJ45 sensor port. Have up to 20 dry contacts on an sensorProbe2+. On the SP2+ 5 dry contact licenses are sold on a per port basis. The dry contacts on the 5DCS are input only, if you require I/O on a sensor port, use the single dry contact cable (DCS15).
AKCP Isolated DC Voltage Sensor Specifications
|Measurement Range||Alarm or Normal|
|Communications Cable||RJ-45 jack to sensor using UTP CAT 5 cable|
|Max. extension cable length||305m (1000 ft.) with approved low capacitance shielded cable|
|Input Voltage||0 to 5 volts|
|Normal input voltage||Settable under software|
|Sensor type||Open / Closed contact switch|
|Current range||Can sink up to 20 mAmps|
|Measurement rate||Multiple readings every second|