JDSU Tri-Porter IVT600 Network Qualification and Testing Tool

The Tri-Porter Network Qualification and Testing Tool is an all-in-one tool for testing the full range of physical wiring tests for fast and efficient installation, testing and delivery of IP based voice, data and video services.Now you can easily test and verify coax, network systems and voice/telephony to ensure optimum performance.

Voice: Telephony Testing

Test and verify proper operation of telephone outlets to assure adequate signal levels. Power-up telephone systems with the on-board dial tone simulator to test connected runs.

• Advanced function telephone butt set
• Call analysis and discovery
• Voltage and current readings
• Line number discovery with captured digits
• DTMF (Dual-tone multi-frequency, touchtone) Decode to watch dialled call numbers for accuracy
• Call waiting service testing
• SLIC (subscriber line interface circuit) simulator
• Speakerphone for hands-free listening and monitoring
• DSL safe
• 20 piece remote wiremapping set

Data: Testing Ethernet Networks

Test newly-installed network cables on unpowered systems or check active networks to troubleshoot physical layer or configuration problems.

• Test to TIA568 interconnect specifications and connected length, CAT5, 5e, 6
• Port Discovery – ISDN, POTS, Token Ring, Ethernet, etc
• Negotiates at 100 Mbit with DHCP or manual addressing
• Ping for IP address information and configuration
• Identifies equipment, showing speed and type
• Displays link speed , 10/100Mbit
• Hub blink to find connected ends in wiring closets
• Qualify lines for VoIP service at 100Mbit speeds
• Cisco Discovery Protocol ready
• 20 piece remote network map set

Video: RF Detection and Testing

HDTV, video on-demand, cable modems etc all demand superb signal quality to work correctly. Testing for physical and electronic variations will guarantee that everything works as required.

• Detects and measures RF service energy levels dB/Mv
• Tests for opens and shorts
• Displays strength of each tested run
• 20 piece remote wiremapping set

The Tri-Porter is supplied with a handy carrying case which holds both the main unit and the remote tester/tracer, together with the 20-piece wiremapping sets for remote discovery of telephone, coax and network cables.