AKCP securityProbe-X60

Product Details

AKCP’s securityProbe-X60 is a full-featured complete SNMP based environmental and security monitoring solution capable of monitoring and alerting to events such as unauthorised intruders, security breaches, equipment breakdown, or equipment damage due to high temperatures, power outage, smoke and flooding.

The securityProbe-X60 will take up to 4 remote controlled cameras, up to 8 AKCP sensors in any combination such as temperature, humidity, smoke detection, airflow, and has the addition of 20 dry contact inputs to monitor the status of any machine.

Intelligent Sensor and Dry Contact Integration

The securityProbe-X60 works with all AKCP intelligent sensors. You can connect up to 8 sensors in any combination to monitor temperature, humidity, water leakage and airflow including long term graphing, security, detection of AC power line voltage, measurement of digital voltmeter, control relays and many more uses. The integrated data and graphing package is also useful for spotting trends and for analysis.

Sensor Notification Wizard

When an event occurs, the securityProbe-X60 can send SNMP traps, email, SMS, MMS, make a telephone call, and create an audio alert. These alert messages are customisable and can include a picture of the event. Event alert information can also include pictures which are stored in a nonvolatile flash memory. The number of pictures taken and the time between pictures can also be determined for each camera. The timestamp is displayed below each image. The securityProbe-X60 has a battery backed-up clock to facilitate accurate record keeping.

Notifications and alarms can be dependant on the states of multiple sensors and can be configured to escalate in severity over time.

The securityProbe-X60 can automatically switch a relay on or off, wake-up or shut down a remote server, send pictures and data via FTP, send a fax or run a custom script.

Mobile Phone Access

No matter where you are you can access the securityProbe-X60 through your Symbian based (mostly Nokia) mobile phone.

You can access your probe and video information from where you happen to be. No computer required. Perfect for checking up on your securityProbe-X60 from out on the road to double check the environmental conditions back at base.

Just download the simple mobile application, input the IP address of your securityProbe8 and off you go.

Once connected to your securityProbe-X60 you can view live streaming video, monitor live probe readings and check for alerts.

You can connect to your securityProbe-X60 via Bluetooth using the optional Bluetooth dongle.

Industry Certifications and Network Management Systems

The securityProb-X60 is certified for use with:

• AdRem NetCrunch
• Big Brother
• ECS
• Castle Rock SNMPc
• HP OpenView
• IBM Tivoli
• LoriotPro
• Logalot
• MRTG
• Nagios
• OpManager
• OpenNMS
• SiteScope
• WebNM and Denika
• WhatsUp Gold

The securityProbe is not-certified but is compatible with the following NMS:

• CiscoWorks
• eHealth®
• MicroMuse®
• Intellipool
• and many more…

Video Conferencing

The securityProbe-X60 can be used as a video conferencing system. Simply connect an external camera and use the integrated speaker and microphone for communication. Perfect for communicating with people in remote data centres where phone lines may be at a premium.

Camera Support

The securityProbe can display pictures from up to four cameras simultaneously up to 640x480 pixel resolution.

Professional quality analogue surveillance and CCTV cameras can be used. Built-in pan-tilt controller interface allows complete control of pan and tilt cameras using the industry standard Pelco-D bus.

When using the built-in simultaneous mode, images from all 4 cameras can be displayed at the same time. Pictures are updated every 5 seconds on all 4 camera channels simultaneously. In scan mode, a single image is displayed in rotation from each camera.

For video streaming, both ActiveX and JavaApplet web applets are available. For a single camera, the maximum frame rate is 30 frames per second at 320x240 pixels. The frame rate depends on the number of camera channels in use, image size (320x240 or 640x480 pixels), and network speed.

The securityProbe-X60 has a single input and output port for audio. The audio input uses a Line-In signal. If you wish to connect a microphone, make sure it is amplified. The connector for both input and output is a 3.5mm stereo jack, though only mono is supported. The output signal is 5Vp-p with sampling frequency of 8 kHz.

Features

Sensor Range
Sensor Range	Thermocouple probe: -270°C - 800°C Temperature probe: -55°C to +75°C
Power Supply
Power Supply	Voltage 7.0-9 V Current >= 1 Amp
Operating Environment
Operating Environment	Sun MAC Linux Windows Vista Windows 2003 Windows XP Windows 2000 Windows NT Windows ME Windows 98 Windows 95
Protocols
Protocols	HTTP on port 80 (selectable) static IP address or DHCP SNMP
Dimensions
Dimensions	9.2" x 5.42" x 1.80" - 1U fitting brackets as standard
Computer Interfaces
Computer Interfaces	RJ45 USB
Measurement Interval
Measurement Interval	Minimum 1 second configurable
Temperature Units
Temperature Units	Fahrenheit or Celsius
Probes
Supported Probes	Temperature Relative Humidity Water Detector Smoke Movement Power Presence Dry Contact Relay Air Flow Power Monitor
Max Probes Supported	8 AKCP Probes
Probes Supplied	1 x 1.6m Temperature/Relative Humidity Probe

Like to know more?

For friendly no obligation advice talk to us via the Online Chat, email info@openxtra.co.uk or call +44 (0)800 612 1357.

Like to purchase this product?

You can buy online from our shop or place an order by phone on +44 (0)800 612 1357, by fax on +44 (0)1943 466003 (you can use the fax order form [PDF], or email sales@openxtra.co.uk. You can also request a quote or enquire about reseller pricing if you are supplying a customer. We are happy to supply to the UK and all European countries. Please ask about supplying to countries outside Europe.