The AKCP sensorProbe8-X60 is a self-contained out-of-the-box solution for remote monitoring and management of external devices such as data centre equipment, HVAC, security equipment, UPS, generators or industrial equipment. SensorProbe8 saves you the cost and hassle of installing a separate software application to monitor your environmental conditions.
Dry Contact Systems
Many different types of equipment and devices use dry contact outputs to send alarm signals to remote panels, remote monitoring systems, and building management systems. Communicating the status of these dry contact systems is important in a complex Enterprise network, or automation industry to protect mission critical installations.
The SP8X-60 comes with 8 full autoSense RJ-45 ports for connecting any AKCP intelligent sensor. An additional 60, 2-wire dry contact ports are provided giving a total of up to 68 dry contact ports or a combination of dry contact and sensor. The specially designed 2 wire dry contact ports are easy to use and allow you to make your own dry contact cables quickly and easily.
Features of the AKCP sensorProbe8-X60
- Network enabled built-in web server and SNMP support
- Notifications via email, SMS (via gateway) and SNMP traps
- 8 ports to connect any AKCP sensor
- 60 dry contact ports for monitoring and alerting to status of devices
- Integrates easily into any existing SNMP based Network Management System
- Unlimited lifetime support
Sensors for the sensorProbe8-X60
Any of the eight ports present on the sensorProbe8 can be used to plug in any of the wide range of AKCP sensors, including temperature, combined temperature & humidity, wetness, airflow, smoke, motion, power presence, combined siren & strobe light alarm.
All AKCP probes use CAT5 cables giving you the freedom to extend the range of the probes over your existing structured cabling infrastructure. You can make best use of your sensorProbe8 investment to monitor multiple locations without the need to install new non-standard wiring.
Industry Certifications and Network Management Systems
The sensorProbe-X20 is certified for use with:
- AdRem NetCrunch
- Big Brother
- Castle Rock SNMPc
- HP OpenView
- IBM Tivoli
- WebNM and Denika
- WhatsUp Gold
Ask a new question
If you have any questions about this product or have any feedback about this page please complete the form below and one of our Technical agents will get back to you ASAP.
Alternatively, if you need an immediate answer, you can telephone our Technical agents for free on 0800 612 1357.
Please see our contact us section for opening times or if you require customer service assistance.