SecurityProbe-X20

SecurityProbe-X20 is a fully featured SNMP based environmental and security monitoring solution capable of monitoring and alerting via email and SMS to events such as unauthorised intruders, security breaches, equipment breakdown, high temperatures, power outage, smoke and flooding and can even take automatic corrective action.

SecurityProbe-X20 will accept up to 4 remote controlled cameras, up to 8 sensors in any combination such as temperature, humidity, smoke detection, airflow, plus up to 20 dry contact inputs to monitor the status of any machine.

Intelligent Sensor and Dry Contact Integration

SecurityProbe-X20 works with all intelligent sensors. You can connect up to 8 sensors in any combination to monitor temperature, humidity, water leakage and airflow including long term graphing, security, detection of AC power line voltage, measurement of digital voltmeter, control relays and many more uses. The integrated data and graphing package is also useful for spotting trends and for analysis.

Sensor Notification Wizard

When an event occurs, the securityProbe-X20 can send SNMP traps, email, or create an audio alert. These alert messages are customisable and can include images. Event alert information can also include pictures which are stored in a nonvolatile flash memory. The number of pictures taken and the time between pictures can also be determined for each camera. The timestamp is displayed below each image. The securityProbe-X20 has a battery backed-up clock to facilitate accurate record keeping.

Notifications and alarms can be dependant on the states of multiple sensors and can be configured to escalate inseverity over time.

The securityProbe-X20 can automatically switch a relay on or off, wake-up or shut down a remote server, send pictures and data via FTP, send a fax or run a custom script.

Mobile Phone Access

No matter where you are you can access the securityProbe-X20 through your Symbian based (mostly Nokia) mobile phone.

You can access your probe and video information from where you happen to be. No computer required. Perfect for checking up on your securityProbe-X20 from out on the road to double check the environmental conditions back at base.

Just download the simple mobile application, input the IP address of your securityProbe8 and off you go.

Once connected to your securityProbe-X20 you can view live streaming video, monitor live probe readings and check for alerts.

You can connect to your securityProbe-X20 via Bluetooth using the optional Bluetooth dongle.

Industry Certifications and Network Management Systems

The securityProb-X20 is certified for use with:

• AdRem NetCrunch
• Big Brother
• ECS
• Castle Rock SNMPc
• HP OpenView
• IBM Tivoli
• LoriotPro
• Logalot
• MRTG
• Nagios
• OpManager
• OpenNMS
• SiteScope
• WebNM and Denika
• WhatsUp Gold

The securityProbe is not-certified but is compatible with the following NMS:

• CiscoWorks
• eHealth®
• MicroMuse®
• Intellipool
• and many more…

Video Conferencing

The securityProbe-X20 can be used as a video conferencing system. Simply connect an external camera and use the integrated speaker and microphone for communication. Perfect for communicating with people in remote data centres where phone lines may be at a premium.

Camera Support

The securityProbe can display pictures from up to four cameras simultaneously up to 640x480 pixel resolution.

Professional quality analogue surveillance and CCTV cameras can be used. Built-in pan-tilt controller interface allows complete control of pan and tilt cameras using the industry standard Pelco-D bus.

When using the built-in simultaneous mode, images from all 4 cameras can be displayed at the same time. Pictures are updated every 5 seconds on all 4 camera channels simultaneously. In scan mode, a single image is displayed in rotation from each camera.

For video streaming, both ActiveX and JavaApplet web applets are available. For a single camera, the maximum frame rate is 30 frames per second at 320x240 pixels. The frame rate depends on the number of camera channels in use, image size (320x240 or 640x480 pixels), and network speed.

The securityProbe-X20 has a single input and output port for audio. The audio input uses a Line-In signal. If you wish to connect a microphone, make sure it is amplified. The connector for both input and output is a 3.5mm stereo jack, though only mono is supported. The output signal is 5Vp-p with sampling frequency of 8 kHz.