EasyCheck 900 LAN Tester with Network Discovery
Benefits
- Identifies continuity problems, shorts, opens, reversed pairs, split pairs, miswires
- Performs Wire map tests
- Measures Cable Lengths, Cat5e, Cat5, Cat4, Cat3
- Scans Network to identify attached devices by IP and MAC addresses
- Built-in Tone Generator
- Network Tests, PING, DHCP, Hubs, NICs, auto MDI/MDIx
- Hub Flash feature
Features
- Easy to use
- Compact handheld design
- Comprehensive testing features
- Supports 1G, 100M, 10M networks, Full and Half Duplex
- Ping three devices at once
- Cable length in metres or feet
General
- Clear easy to read display, 128 x 64 Dot Matrix LCD with backlight
- Battery life 2.5 years Standby
- 50 Hours Cable testing w/o backlight
- 15 Hours Network testing w/o backlight
- Min length for split pairs 1m (3ft)
- Min length for single-ended cable test 1.25m (4feet)
- Max length Cat5/6 cable 0 to 457m (0 to 1000ft)
Supplied with
- 1 x Remote
- 2 x RJ45 Cables
- 2 x RJ11 Leads
- User Guide
- Soft Case
Questions
Ask a new question
If you have any questions about this product or have any feedback about this page please complete the form below and one of our Technical agents will get back to you ASAP.
Alternatively, if you need an immediate answer, you can telephone our Technical agents for free on 0800 612 1357.
Please see our contact us section for opening times or if you require customer service assistance.







