AVTECH Relay Sensor

The AVTECH Relay Sensor allows low voltage devices to be turned on/off. The Relay Sensor supports up to 4 devices and is compatible with the Room Alert 4E, 32E and 32W and Signal Tower Combos models.

Each relay supports loads up to 0.3A at 125VAC or 1A at 24VDC. The first three relay outputs on the Relay Sensor can be individually controlled and activated directly from the Room Alert Web Interface or in response to an alarm condition. The fourth relay output can be used as a general alarm output and will be activated whenever any of the first three relay outputs are activated.

The sensor connects directly into the Light Tower Connection Port on the back of any Room Alert 4E, 32E or 32W or Signal Tower Combo ID box via the included 3m Light Extension Cable. The Light Extension Cable can be extended to approximately 230m by adding more extension cables. Sensor cable is provided to connect the relay outputs to the desired device such as a building alarm panel or other notification system. Cable distance can be extended from the standard 7.5m to approximately 300m by using standard speaker wire, twisted pair or any reliable low voltage 2-wire cable.

Features and Specifications for the Relay Sensor