AKCP Temperature Probe
The AKCP 0.3m temperature probe is microprocessor controlled, designed to record accurate temperature data.

The probe is auto-sensed by the sensorProbe or securityProbe when you plug it in, reducing the burden of administration on you.
It is compatible with the sensorProbe2, sensorProbe8 & securityProbe5E.
- Never needs Calibration
- Measurement range Celsius:-55°C to +75°C
- Measurement resolution Celsius: 1°C increments
- Measurement accuracy Celsius: ±0.5°C accuracy from -10°C to +75°C
- Communications cable: UTP CAT 5 wire
- Sensor type: semiconductor microprocessor controlled
- Power source: powered by the sensorProbe. No additional power needed
- sensorProbe auto detects the presence of the temperature sensor
- Measurement rate: one reading every second
- Up to 2 temperature sensors per sensorProbe2, 8 per sensorProbe8 or securityProbe5E, more with expansion units
- Full autosense including disconnect alarm
Questions
Q: Am i right in thinking that this probe can be extended by up to 300m, and is still auto-discovered by the sensorProbe2?
AKCP claim that it is possible to extend sensors up to 300m (1000ft), but I would not use the 1ft sensor for this application. You would need to use an in-line coupler on the sensor and the connection quality is rarely good enough . A better option is to use the 5ft sensor and a long, high quality Cat5 patch cable or through you structured cabling system.
Ask a new question
If you have any questions about this product or have any feedback about this page please complete the form below and one of our Technical agents will get back to you ASAP.
Alternatively, if you need an immediate answer, you can telephone our Technical agents for free on 0800 612 1357.
Please see our contact us section for opening times or if you require customer service assistance.



