AKCP Combined 0.3m Temperature/Humidity Probe
The AKCP 0.3m combined temperature & humidity probe only takes a single port on your sensorProbe2, sensorProbe8 or securityProbe. By combining your sensors you can monitor more locations allowing you to get the most out of your investment.
The probe is built using high quality CAT5 cable. Consequently you can extend the range of your probe using your existing CAT5 infrastructure. Not only does this reduce the burden of installing new cabling it also means that you can utilize your existing investment in your cabling infrastructure. The probe can be extended by up to 300mt, perfect for monitoring remote comms rooms and server rooms.
The combined temperature/humidity probe is also available as a waterproof version.
- 0.3m Temperature probe RJ45 connector
- Measurement range Celsius:-40°C to +75°C
- Measurement resolution Celsius: 1°C
- Measurement accuracy Celsius: ±0.2°C accuracy from -40°C to +75°C
- Relative Humidity
- Measurement range: 0 to 100% Relative humidity
- Sensor element wettable without damage
- Resolution: 1%
- Accuracy at 25°C ±3%
- Communications cable: UTP Cat 5 cable
- Power source: powered by the sensorProbe or securityProbe. No additional power needed.
Questions
Q: Is this compatible with the AVTECH Room Alert 4ER?
The AVTECH Room Alert 4ER is only compatible with all AVTECH probes, not those from other manufacturers. There are a wide variety of AVTECH probes available including temperature/humidity at the bottom of the Room Alert 4ER page at this link Room Alert 4ER.
Ask a new question
If you have any questions about this product or have any feedback about this page please complete the form below and one of our Technical agents will get back to you ASAP.
Alternatively, if you need an immediate answer, you can telephone our Technical agents for free on 0800 612 1357.
Please see our contact us section for opening times or if you require customer service assistance.



