Product Images
JDSU LanScaperPRO Cabling and Network Test Kit NT850
SKU: NT850
Price: £429.50 excl. VAT (£504.66 incl. VAT)
The new NT850 LanScaperPRO Kit combines the functions of a high-end cable tester and length measurement device with the capability to identify, monitor and correct LAN issues associated with physical layer and link conditions in the network. The NT850 kit, supplied with 8 remotes and a tone tracer, is ideal for network and IT managers and installers who need to solve problems at the physical layer on active or newly installed networks.
Use the LanScaperPRO to identify devices, pinging network services to verify connections and IP addresses or conduct link tests identify speed and capabilities. When testing cables, LanScaperPRO provides full cable testing, displaying wire map, ID and any faults including shorts, opens miswires, split pairs, and reverses. It will also measure cable length and generate tones for signal tracing and cable identification.
Features of the LanscaperPro Kit NT850
- Detects and reports active Ethernet devices, POTS, ISDN, Token Ring and other devices at the other end of a link for 10BASE-T, 100BASE-Tx and Gigabit
- Identifies IEEE 802.3af and legacy Cisco In-Line Power (ILP) at the other end of the jack or cable being tested, including the presence of raw DC power. Verifies wiring installation capability to provide PoE to end device
- Simultaneously ping 3 addresses; target, router and DNS server. DHCP support allows for pinging of router and DNS server with no setup
- Blinks a link indicator to identify hub or switch port and links to Cisco bridge or router ports using Cisco Discovery Protocol.
- Tests cabling configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs and reverses
- Displays length measurement for each pair (imperial or metric)
- Wiremaps network connections with remote identifiers (NT850 supplied with full set)
- Generates selectable tones on selected pins for use with the tone tracer supplied for cable tracing
The NT850 LanScaperPRO is supplied with the following:
- NT850 LanScaperPRO Cabling and Network Tester
- 8 x cable test remotes
- 1 x Tone Tracer (TT100)
- 2 x 1ft (0.3m) patch cables
- 2 x RJ45 to alligator clip cables
- 2 x RJ45 to F-connector5 adaptor
- 2 “no fault” RJ12 cables
- Cordura Case for all items
Questions
Ask a new question
If you have any questions about this product or have any feedback about this page please complete the form below and one of our Technical agents will get back to you ASAP.
Alternatively, if you need an immediate answer, you can telephone our Technical agents for free on 0800 612 1357.
Please see our contact us section for opening times or if you require customer service assistance.
Add new comment