Structured cabling solutions

One major problem when installing an environment monitor is that often the location to be monitored is some distance away from the monitor.

One solution is to run the probe cable from the monitor to the location that you desire to monitor.

A better solution is to use your existing structured cabling infrastructure. The AKCP range of probes all use CAT5 cable and can simply be plugged into a RJ45 outlet and then be patched through your patch panel to the central monitor unit.

By using your existing infrastructure you can have a much tidier installation. You don’t need to install any new cabling and you get a lot of flexibility in where your probes are located. Moving a probe becomes a simple matter of re-locating the probe and patching the right cable on the patch panel.

The AKCP probes can be located up to 300 metres (in cable length) from the central unit.